View Cart “Alfa Tools 3/4-16 Hi Speed Plug Tap” has been added to your cart.
Alfa Tools 1″-14 Hi Speed Plug Tap
Alfa Tools 1″-14 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $113.05 Add to cart
Alfa Tools 1″-8 Hi Speed Plug Tap
Alfa Tools 1″-8 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $113.05 Add to cart
Alfa Tools 1/2-13 Hi Speed Plug Tap
Alfa Tools 1/2-13 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $35.99 Add to cart
Alfa Tools 1/2-20 Hi Speed Plug Tap
Alfa Tools 1/2-20 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $37.46 Add to cart
Alfa Tools 1/4-20 Hi Speed Plug Tap
Alfa Tools 1/4-20 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $14.33 Add to cart
Alfa Tools 1/4-28 Hi Speed Plug Tap
Alfa Tools 1/4-28 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $14.33 Add to cart
Alfa Tools 10-24 Hi Speed Plug Tap
Alfa Tools 10-24 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $15.38 Add to cart
Alfa Tools 10-32 Hi Speed Plug Tap
Alfa Tools 10-32 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $15.38 Add to cart
Alfa Tools 12-24 Hi Speed Plug Tap
Alfa Tools 12-24 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $16.49 Add to cart
Alfa Tools 3/4-10 Hi Speed Plug Tap
Alfa Tools 3/4-10 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $90.19 Add to cart
Alfa Tools 3/4-16 Hi Speed Plug Tap
Alfa Tools 3/4-16 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $90.19 Add to cart
Alfa Tools 3/8-16 Hi Speed Plug Tap
Alfa Tools 3/8-16 Hi Speed Plug Tap

Features:

• General purpose taps can be used by hand or under power,
in through (open both ends) or blind holes (closed one end) .
• Suitable for tapping most materials .
• Standard “H” limits provide adequate “class of fit .”
• Taper taps (7 to 10 threads) . Longest chamfer insures easier starting .
• Plug taps (3 to 5 threads) . Most common chamfer . Used in through or blind holes .
• Bottoming taps (1 to 2 threads) . Used for threading close to the bottom of a blind hole

not rated $19.97 Add to cart